pNeuton Model S
Ventilator
The pNeuton Model S Ventilator with CPAP (Continuous Positive Airway Pressure) provides mask CPAP plus volume or pressure ventilation for pediatric to adult patients in pre-hospital and hospital environments. Built tough for the rigors of EMS ground and air transport.
For early intervention, the built-in CPAP system allows you to start with face-mask CPAP and seamlessly switch to mechanical ventilation if needed without interruption. The built-in high output demand flow CPAP system with automatic sensitivity ensures critical care ventilation needs are optimized for spontaneous and mandatory breaths.
Fully pneumatic, the pNeuton S does not require batteries or electrical power so it is always ready for operation.
With simple-to-use controls – Tidal Volume, Respiratory Rate and Pressure Limit – the pNeuton S accommodates even the most challenging patients in respiratory distress.
UNIQUE ADVANTAGES
- Fully pneumatic – No batteries or electricity needed
- CPAP for EMS ground and air transport
- Pediatric to adult patient support in pre-hospital and hospital settings
- Mask CPAP plus volume or pressure ventilation
- 65% oxygen delivery significantly extends transport times for the most difficult patients
- MRI conditional – 3 T or less
- Small, compact, lightweight, portable
- Easy-to-use controls
- Made in Melbourne, Florida, USA
Benefits
BENEFITS FOR THE PATIENT
- Provides invasive or non-invasive patient support
- Low patient Work of Breathing with peak flow of up to 140 L/min to meet patient needs
- 100% or 65% to match patient oxygen requirements
- Switch from mask CPAP to mechanical ventilation seamlessly and without interruption
- Low-profile, easy-seal mask reduces facial pressure
Benefits for You, the Healthcare Provider
- Calibrated CPAP and oxygen controls for easy operation
- MRI conditional up to 3 T – place right next to the scanner with remote alarm output for the control room
- Manometer to monitor patient pressure and effort
- Built-in CPAP / PEEP system with automatic sensitivity for changing patient needs; no need for external CPAP valves
- Night visible pressure gauge for patient monitoring
- Monitor CO2 with invasive/non-invasive ventilation
- Oxygen powered – no batteries to change
- Rugged and lightweight (6 lbs / 2.7 kg)
- Protection for the caregiver from patient exhalation using the bacteria / viral filter
Benefits for your Budget
- Two oxygen levels; conserve oxygen with 65% setting
- 45-minute CPAP run time on a D cylinder
- Demand flow CPAP system with minimal wasted oxygen
- Economical patient circuits save on operating costs
- No batteries or electronics decrease maintenance cost
Specifications
pNeuton Model S P/N 20002
DESCRIPTION
- Pneumatically operated for use on pediatric and adult patients > 23 kg
- Demand flow system for spontaneous breathing to 140 L/min
- Pressures displayed on manometer
- Modes of Operation: CMV, IMV, CPAP, Pressure Limit
- Mandatory breath flow rate is fixed at 36 L/min
- MRI conditional – 3 T or less, maximum spatial gradient magnetic field of 720-gauss/cm or less, no gauss line restriction
- Weight: 6 pounds (2.7 kg)
- Dimensions: 4″ H x 8″ W x 6″ D (10 x 20 x 15 cm)
- Input gas requirement: 55 psi ± 15 psi (3.8 bar ± 1 bar)
- Classification according to MDD 93/42/EEC: IIb
- Meets International Standards for transport ventilators:
CONTROL SETTINGS
Mandatory Breaths: ON or OFF
Respiratory Rate: 2 to 50 bpm
Tidal Volume: 360 to 1,500 ml
Peak Pressure: 10 to 75 cm H2O (mbar)
PEEP / CPAP: 0 to 20 cm H2O (mbar)
Oxygen: 100% or 65%
AUDIBLE AND VISUAL ALARMS
- All pneumatic alarm system (no batteries – requires minimum 30 psi / 2 bar gas supply pressure)
- Low gas source pressure
- If source gas drops below 40 psi (2 bar)
- Continues operation as long as oxygen is available
Regulatory Compliance
International Regulatory Compliance Information
Under regulatory compliance, our goal is to take steps to comply with relevant laws, policies, and regulations for medical device manufacturing and marketing Airon products. All Airon products are designed, manufactured, and supported based upon sound quality procedures. Every device is CE marked as well as USA FDA cleared.
Product Certification and Approvals
USA – FDA Free Sale Certificate – Certificate to Foreign Government
Canada – Medical Device Licenses
pNeuton ventilator license | patient circuit license
Europe – CE Marking certificates – Airon EC Certificate
Europe – Declarations of Conformity
User Resources
pNeuton Model S Product Brochure: English | Espanol | Deutsch | Francais
pNeuton Model S Operator’s Manual: English | Espanol | Deutsch | Francais
pNeuton Model S Operational Verification Procedure: English | Espanol | Deutsch | Francais
pNeuton Model S Self-Guided Presentation: English | Espanol | Deutsch | Francais
pNeuton Model S Introduction Video: English
pNeuton Model S Preventative Maintenance Program: English
pNeuton Model S Limited Warranty: English
Factory Rebuild Program: English
Technical Bulletins
pNeuton Model S Environmental Testing: English
pNeuton Model S Usage with NBC Filter: English
MRI Certification pNeuton Ventilators: English
Compliance with US Army Airworthiness Standards: Endlish
Real CPAP for EMS: English
Work of Breathing Comparison: English
pNeuton Bi-level Pressure Ventilation: English
Respiratory Care Test Comparison: English
NBC filter with pNeuton ventilators: English
pNeuton mini compatibility with Bunnell Life Pulse HFV: English
Product Comparison Chart: English
Clinical Articles
Ordering Information
Ordering information for the
pNeuton Model S
Ventilator, its accessories, and more.
20002 pNeuton Model S ventilator, device only
20012 pNeuton Model S USA Startup Kit; everything you need to get started using your new ventilator.
Kit includes:
- (1) pNeuton Model S
- (1) DISS high pressure oxygen hose, 8 foot, green
- (1) Model S Travel Bag
- (1) Box of 58011 patient circuits – 6 foot, large adult mask / head strap, single patient use, qty 10
20013 pNeuton Model S International Startup Kit; everything you need to get started using your new ventilator.
Kit includes:
- (1) pNeuton Model S
- (1) high pressure oxygen hose, 2.4, white, DISS connection on one end, customer specifies probe for other end (DIN, BOC, AGA or NIST)
- (1) Model S Travel Bag
- (1) Box of 58011 patient circuits – 1.8m, large adult mask / head strap, single patient use, qty 10
PATIENT BREATHING CIRCUITS
58001 Adult / pediatric, disposable, single use, 6 foot (1.8m), qty 15
58006 Adult / pediatric, disposable, single use, 6 foot (1.8m), expiratory filter, qty 15
58011 Adult / pediatric, disposable, single use, 6 foot (1.8m), large face mask / head strap, qty 10
58021 Adult / pediatric, disposable, single use, 6 foot (1.8m), large face mask / head strap, expiratory filter, qty 10
SAFETY NOTE: Only Airon manufactured patient breathing circuits are approved for use with pNeuton ventilators.
CPAP MASKS
CPAP Mask, adult / pediatric, non-vented full face mask, short term use, qty 20
58208 Small
58202 Medium
58211 Large
HERO CPAP Mask, adult / pediatric, non-vented full face mask, single patient use, qty 20
58220 Small
58221 Medium
58222 Large
MOUNTING SOLUTIONS
21001 Mobile Stand, MRI compatible. Includes ventilator mounting plate and dual E cylinder holders.
21017 Bed Rail Mount, Model S
21018 Secure Pole / Rail Mount with ventilator mounting plate. *Meets European EN 1789 requirements.
21020 Travel Bag, Model S
DEVICE ACCESSORIES
21002 Rigid Wall Test Lung, 1 liter
GAS SUPPLY ACCESSORIES
21051 Oxygen Regulator, MRI compatible, high pressure D / E cylinders
21071 Oxygen Cylinder, E size, MRI compatible
Specialty Quick Connect Couplers
21100 Ohmeda Female, 3 inch hose
21101 Chemtron Female, 3 inch hose
21102 90 degree Male – Female DISS
Specialty Quick Connect Fittings
50347 Ohmeda Quick Connect
50348 Chemtron Quick Connect
PRODUCT MANUALS
97001 pNeuton S Operator’s Manual, English
97003 Spanish
97004 French
97005 German
Other languages available.
97021 User Resource CD
97025 Clinical Training DVD
Airon Product catalog
Airon Corporation manufactures and markets innovative, reliable, effective, fully pneumatic oxygen-powered life support ventilation and CPAP products and accessories for healthcare workers worldwide. Our products support neonates, infants, pediatrics, children and adult patients in EMS, hospital ER and trauma, MRI, OR, ICU, and transport.
ADDRESS
751 North Drive,
Unit 6
Melbourne, Florida
32934, USA
Phone: 888-448-1238
(toll-free for North America only)
Phone: +1-321-821-9433
Fax: +1-321-821-9443
SOCIAL MEDIA
Copyright © 2024 Inspiration Healthcare Group plc. All Rights Reserved. Inspiration Healthcare Group plc companies: Airon Corp I Inspiration Healthcare Ltd I SLE Ltd I Viomedex Ltd